Ever wanted to know whats inside one of those laser light projectors ? Well here we go !
The body of the projector is sealed with two rubber gaskets that seal against the body.
A gasket in the front and gasket in the back
Removing the 4 Phillips screws in the body revealling the guts of the unit. From left to right, Motor for rotating Prism,Red Diode and heatsink, green diode and heatsink, controller cicuit board.
There is a prism infront of a rotating mirror, the prism is held on with two screws.
View through the prism
The Green and Red lasers, including a mirror for the red laser.